Before installing this product，Please read this manual carefully. Ensure full understanding of this specification to avoid unnecessary damage and additional costs.

RF Remote Led RGB Controller adopts the most advanced PWM (Pulse Width Modulation) digital technology with 3 channels constant voltage led RGB controller. This model designed for RGB led products. Especially, it is designed with synchronization function. It is convenient to use RJ45 connector to connect the multiple controllers together, and achieve the synchronization function of thousands meters led strips. In theory, they can be connected numerous.

Echnical Parameters:

Working temperature -20-60℃
Supply voltage DC12V~24V
Output gray 256 levels (with continuous reception)
Connecting mode common anode
External dimension L91*W88*H24 mm
Packing size L106*W106*H66 mm
Net weight 180g
Gross weight 240g
0utput 3 channels
Output current <8A(each channel)
Output power 12V:≤288W,24V:≤576W
RF frequency 433.92MHz

 

Product Features:

  • Designed for RGB constant voltage LED lights, Max.output:3*8
  • Working voltage DC12-24V, it can be universal in this range.
  • Adopts PWM digital technology, signal frequency: 400Hz.
  • Multiple controllers can work synchronically when connected by network cable through the RJ45 connector, the network cable between 2 ports up to 80 meters.
  • Warranty of this product is threeyears, exclude the artificial situation of damaged or overload working.

External Dimension:

Interface Specifications

  1. Power and load interface:

  1. Synchronization function

Multiple controllers can work synchronically when connected by network cable through the RJ45 connector.

Direction for use:

Adopt RF wireless remote control, function of each button as below:：

 

RF CODE

Tips: Receiver can be controlled by any one the same remote as factory default; full touch remote control delivered with unique RF code as factory default; if unique-control is needed, please matching the code before installation and using.

Power off , Then Power on , Press this key 3 times , Then the led strip will be flash . This shows that you can control the receiver

Typical Applications：

Application Circuit 1:

Application Circuit 2: （Synchronization function with network cable）

Tips:  The green signal indicator light will uniform flash with proper communication, and will off with any incorrect signal connection (like: poor contact, confused input and output, wrong wire order).

Warning

  1. Supply voltage of this product is DC12-24V, never connect to other voltage.
  2. Before power on, please make sure the wires are connected correctly according to connecting diagram. Or (like: short-circuit connection, positive-negative reverse) will damage the device.
  3. Warranty of this product is three years, but exclude the artificial situation of damaged or overload working.