- 5V, RGB, built-in IC, one light and one control
- WS2812B is cost-effective, popular in the market, and has a large shipment volume.
- WS2813 with breakpoint resume function, reduce maintenance costs
- Data transmission 800KHZ/S, PWM refresh rate 1.2KHZ/S.
|Part No:||Input Voltage||IC type||LED Quantity||IC QTY||PCB width:||Color||Max Power||Min Cut||IP Grade||Control signal:|
01 . 5V, RGB, built-in IC, one light and one control
- This is 5V addressable led strips, it’s RGB type, inside IC, one light control individually. WS2812B has built-in IC SMD LED, each LED is addressable, one IC control each LED can be controlled individually.
- WS2812B Using SMD5050 built-in IC SMDto achieve addressable and programmable digital led strips, which greatly reduces the use of external components, making the product look simpler and more beautiful to the greatest extent.
02 . Different between WS2812B and WS2813
The WS2813 can continuously transmit the signal in the event of a signal interruption, if any LED on the strip is disconnected, the circuit will remain off, while the other LEDs will continue to glow. As long as the other adjacent LEDs are not damaged, the other LEDs will work fine, if one LED on the WS2812B strip is damaged, the circuit will be broken and the rest of the LEDs will stop emitting light.
03 . Data transmission 800KHZ/S, PWM refresh rate 1.2KHZ/S.
The controller controls the circuit on the FPCB circuit board through the IC chip to achieve the effect of LED lighting, (chasing, running water, running discoloration, breathing, flashing, clockwise horse racing), running counterclockwise, simulating lightning, fixing color, etc., data transmission 800KHZ /S, PWM refresh rate 1.2KHZ/S can be suitable for customers to use in home decoration, bar, KTV decoration, garden landscape, sports venues, exhibition halls, hotels, villas and other use environments.
04 . Wiring: WS2812B 3PIN, WS2813 4PIN.
- WS2812B Wiring: 3PIN terminal and two power lines red 5V (V+)/white wire: negative 5V (GND),green: the two extra wires from the signal wire (DATA) are spare power wires, red 5V (V+), white 5V negative (V-)
- WS2813 Wiring:4PIN Connector and extra red / black power wires,red wire 5V (V+) yellow wire: signal wire, green wire: Backup data signal input， black wire: ground wire GND) The extra two are spare power cables, red 5V (V+), black 5V negative (V-)
05 . Customizable in various sizes
Cutting and welding is convenient and free: each LED can form a loop, which can be arbitrarily cut and welded along the above tangent to meet the needs of various light strip lengths required by customers
06 . Waterproof levels
It can be made into a variety of waterproof levels, dripping waterproof (IP65), all-inclusive casing waterproof (IP67), plastic injection in the casing (IP68), and the latest extrusion molding (IP68)
07 . Flexible PCB
- WS2812B & WS2813 Using the most flexible FPC as the base material, FPC has good electrical conductivity, fast heat dissipation, bending resistance, and can be arbitrarily bent into any shape。
- Double Layer Pure Copper Flexible Circuit Board is Adopted to Ensure Excellent Conductivity and Extremely Long Service Life of the Lamp Strip.
08 . Dimensions:
09 . Connect Drawing:
(1) Paste Installation:
This Installation Method is Generally Used for the Waterproof Environment,
And the High-viscosity 3m Adhesive is Attached to the Back of the Lamp Strip,
Which Can Be Directly Pasted on the Required Solid. The Surface of the Media.
(2) Snap-on Installation:
This Installation Method is Suitable for the Casing Waterproof Product.
The Product is Fixed by the Screw Transparent Buckle to Make the Installation Firmer.
· Please Consult an Electrician Before Doing Any Electrical Worker.
· the Strip and Its Components Cannot Be Mechanically Pressed.
· Correct Electrical Polarity Needs to Be Addressed.
· Pay Attention to ESD Precautions During Assembly.
· Installation Should Be Done by an Electrician.
· The LEDs Should Be Kept at ≤86°f and ≤70%RH.
· When Storing the LEDs Use Moisture Proof Packaging.
10 of the Most Common Customer Questions (FAQ)
WS2812B and WS2813B all are IC which is from WorldSemi. WS2812B has better structure than WS2812. And the WS2813B most advantage is: runs on dual-signal wires, with signal break-point continuous transmission.
WS2811 is 12V 3 led per group to control, WS2812B is 5V input , control SMD individually.
For a professional led strip manufactory. SK6812 is same function as WS2812B, They are only from different IC supplier.
WS2812B led strip is one kind of addressable led strip, we also call it digital led strip and pixel led strip. It’s made by WS2812B IC, it’s build-in one type, and always 5V.
No. RGB led strip without IC inside, there can not be addressable. Addressable led strip means there have IC on it, so it can be control different in every LED colors or every group colors.