Dimmer adopt the most advanced PWM (Pulse Width Modulation) digital dimming technology, especially design for single color led strip. Adopt full touch RF remote control. 5 function buttons and 1 dimming ring in the center, all buttons are in the touch form, and the dimming ring has 128 levels in different brightness value. Particularly, there is a sense light in the remote control center. It shows the exactly light which was be touched. As the led strip is the same brightness level. Further, there are 3 dynamic modes in the mode button, and the speed is adjustable. In order to achieve the market need, the synchronization work of more lamps, it is designed the conjunction-sync-work function with RJ45 connecter, user-friendly.
- Adopt PWM technology, and the dimming ring in the center has 128 levels in different brightness value, smooth and flicker-free.
- High watt output design, up to 1*25A/ 300W.
- Easy connection to achieve multiple dimmers sync-work by RJ45 terminal.
- Adopt RF remote control technology and full touch design.
- Designing for: LED constant voltage single color product like LED single color strip.
- 3-year warranty.
|Static power consumption
||Up to 20M
|Max. Output power
1、Power and load interface
2、RJ45 synchronization interface
Direction for use
Adopts RF full touch control, with one dimming ring and 5 function buttons.
Tips: Without any operation more than 20 seconds, the touch remote will enter the sleep state, please SHAKE the remote to wake up it before the next using.
The function of each button as below:
|Name of key
||ON in any time
||OFF in any time
||The mode will move to next, when touch the key each time
||The Brightness will +1, when touch the key each time
||The Brightness will -1, when touch the key each time
||Touch any brightness value which you want
Tips: Receiver can be controlled by any one the same remote as factory default; full touch remote control delivered with unique RF code as factory default; if unique-control is needed, please matching the code before installation and using.
Matching code operation
Power off , Then Power on , Press this key 3 times , Then the led strip will be flash . This shows that you can control the receiver
- Supply voltage of this product is DC12-24V, never connect to other voltage.
- Before power on, please make sure the wires are connected correctly according to connecting diagram. Or (like: short-circuit connection, positive-negative reverse) will damage the device.
- Warranty of this product is two years, but exclude the artificial situation of damaged or overload working.