Product Description: 

This RF Mini RGB controller adopted the advanced computer control chip. Controlled by 433Mhz wireless remote.Its mainly used to controlled all kinds of constant voltage led lights,such as:LED source, LED strips,led wall washer,wall Glass curtain lights,etc.It integrated with low cost,easy connection,simple manipulation and others advantages.User can choose the mode of fade, strobe,Blasting flash,flicker,and other Static color model. What’s more, this controller have the characteristics of small volume, easy to carry,etc, its popular amount the many markets.

Technical Parameters:

  • Working temperature:-20-60℃
  •  Input voltage:DC5-24V
  • Output:3 circuit
  • Connection mode:Common anode
  • controller size:L40.0×W12.0×H5mm
  • controller size:L85.9×W39.6×H6.9mm
  • RF frequency:433.92Mhz
  • Net weight:35g
  • Gross weight:40g
  • Static power consumption:<0.5W
  • Output current:<2A*3CH(each circuit)
  • Output power: 5V:<30W, 12V:<72W

External dimension:

(controller size )

(Remote size)

Connection description:

Power input :5.5×2.1mm female DC connector

Signal output port:2.54mm female 4 pins connector

Direction for use:

1.The match code instructions:

Press the key       within 4 seconds when power the controller.Each time powered the controller, just can be match code for one time. If want to match code again, then need to cut off the power , connected to the power again.

2.Remote control function instructions:

There are 10 buttons on the remote , the functions are as below:

Turn ON/OFF the controller. Press this key within 4 seconds to match code when powered the controller.

Auto play key. on any state to press this button , the controller will be take turns to play each dynamic mode by cycle for 3 times.

In dynamic mode, press this key switch to static mode for the first time,the color will backword/forward to the next color when press each time.

In dynamic mode, press this key switch to static mode for the first time,the brightness will increase/decrease for one level when press each time,total 5 level.

In static mode, press this key switch to dynamic mode for the first time,switch to the next backward/forward mode when press each time.

In static mode, press this key switch to dynamic mode,the changing speed will increase/decrease for one level when press each time,total 10 level.

3、This controller’s sequence is +RGB order,in case of other sequence(+BRG/+GRB) will appear in the other effect. Based on sequence of + RGB, pattern are as follows:

 

 

 Dynamic model

NO. Mode NO. Mode NO. Mode
  1 7 color fade 8 Purple fade in and fade out 15 Blue blasting flash
  2 3 color fade in and fade out 9 Blue fade in and fade out 16 Purple blasting flash
  3 7 color fade in and fade out 10 3 Color Jump 17 Yellow blasting flash
  4 White fade in and fade out 11 6 color Jump 18 White blasting flash
  5 Green fade in and fade out 12 3 color flash 19 3 color blasting flash
  6 Yellow fade in and fade out 13 Red blasting flash
  7 Red fade in and fade out 14 Green blasting flash
 

 

 

 Static mode

NO. Mode NO. Mode NO. Mode
1 Red 8 Milk-white 15 Blue-purple
2 Green 9 Dark yellow 16 Yellow-white
3 Blue 10 Sky blue 17 yellow
4 White 11 Brown 18 cyan
5 Orange 12 Pink-white 19 purple

Typical Applications:

Cautions

  • This products Input voltage is DC5-24V,other input voltage are not allowed.
  • Lead wire should be connected correctly,according to the wire color and the connecting diagram offers.
  • Overload are prohibite