COB led strip specification
The COB led strip is a very good used for cover, Cabinet & Furniture soffit lighting, showcase and display path and contour making. Edge, and back lighting.
Product characteristic:
Name | COB-160-24V-8MM |
Voltage | DC24V |
Power | 10W/m |
LED Qty/m | 160leds/m |
PCB Width | 8mm |
CRI | Ra>80/90 |
lm/m | 1100lm/m |
Color | 2700K/3000K/4000K/6000K/R/G/B |
PCB Color | White |
Packing | 5m/roll |
Beam Angle | 180° |
1. Wide viewing Angle up to 180 degree.
COB led strip are 180 degree viewing angle. SMD LED Strip type is normally 120 degree viewing angle.
Put the chips on board then put Phosphor on chips let the viewing angle bigger, then it’s less dark zone
2. Excellent CCT uniformity for continuous orders.
With our experience engineer team. we can keep excellent CCT uniformity for continuous orders. and keep Color- Consistency: 3 SDCM.
Ensure your every orders same color, and continuouse provide super work for your customers.
3. 22AWG PURE COPPER WIRE
We pay attention to every details, the connect cable we use 22AWG pure copper wire. Always keep 3/8”stripped off the end of the LED for wiring purposes.
Extruded Silicone waterproof



Put in tube waterproof



4. Very nice color and it’s main color temperature.

5. High CRI type, based on 90, even RA > 95

Dimensions:
Connect drawing:
The installation:
1. This Installation Method is generally used for the Non waterproof Environment.
2. The High-viscosity 3m Adhesive is Attached to the Back of the Strip
3. It’s can be directly pasted on the Required Solid.

Easy to Use and Easy to Install

Tear Off the Adhesive Tape

Paste to Where You Need to Install
Accessories:
Free soldering Connector: 6mm; 8mm; 10mm

Middle Connector

90 cable connector

End connector
How to cut and connect it

1. Cut the COB on the cut mark.

2. Take the 3M tape out.

3. Put the strip with the connector and connect it together.


Application:





Packing:




Box Size: 43*43*35cm 100 reels per box
Weight: IP20: 12KG