Full Spectrum Led Strip Grow Lights

Product Specifications:

Part NO.	A0052
LED	2835
Quantity	120 SMD / M
IP Rank	IP20
Color	R, Y, B, G, CW, WW, PW
PCB Color	White
CRI	CRI > 95
Power ( For 5M )	75W ± 10%
Dimension	5000 * 8 * 2.3mm

Product Details:

01. RESISTANCE
Reflow Welding Process, Low Temperature Reflow Welding, Full and Smooth Welding, Environmental Protection and Durability.

02. 22AGW PURE COPPER WIRE
Welding is Firm, Good Overcurrent PVC Wire.

03. SOFT LIGHT WITH
Using the FPC As a soft Substrate, Can Be Arbitrary Bending Will Not Break, Easy to Shape.

Dimensions:

120LEDs/M

Connect Drawing:

Waterproof Level:

Applicable to Dry

Environment

Applicable to Water

Environment

Applicable to Flooded

Environment

Defining Full Spectrum

High CRI type, based on 90, even RA > 99

Full-spectrum light, excellent color rendition ability with typical optical parameters of Ra (avg R1~R8)=97, Ra’(avg R1~R15)=95, R9≥90, Rf (Fidelity Index)=95, Rg (Relative Gamut Index)=100, specific for high chromaticity application.

Truly full spectrum light sources, by virtue of being similar to natural daylight, must have a very high CRI be considered a true, full spectrum light source.

Apply to Most Plants: This full spectrum LED grow light produces lights of all kinds of wavelengths plants need in sprouting, growing and blossoming, just like the sun! Suitable for most plants, don’t need to think about which wavelength of lights would fit your plants, this grows light will solve this problem for you.

Wide Application: Used as plant growth supplementary lighting. Widely used in the vegetable greenhouse, vegetables, and fruits, floriculture, propagation, city farming

LED Test Report

Product Mark

Product Ty: 12V 2835 120 2700K

Temperature: C’

Manufacturer:

Humidity : 65%

Test Date : 2021-06-09 17:14:24

Chroma Parameters
Chro.Coor.: x=0.4626 y=0.4172 u=0.2613 v=0.3535 duv=0.0022
CCT: Tc= 2713K Dominant Wave.: 583.5nm Purity: 64.1% Centre Wave:615.5nm
Flux RGB Ratio: R=26.3%,G=72.0%,B=1.7% Peak Wave.: 635.7nm Half Width: 151.7nm

Rendering Index: Ra= 97.4 CRI=96.4

R1 =99 R2 =99 R3 =98 R4 =97 R5 =98 R6 =97 R7 =96
R8 =96 R9 =91 R10=99 R11=96 R12=86 R13=99 R14=98 R15=98

Fridelity Index(RF)=90.5 Gamut Index(Rg)=96.8

Photo Parameters
Flux: 1121.21lm Effi.: 74.21lm/W Radiant: 4318.1mW Iv: 0.0mcd

Ele. Parameters
Voltage: U=12.00V Current: I=1.2590A

Power:P=15.120W Power Factor:PF =1.000

Instrument state
Instrument:Hopoo HP8000S Integral Time:99.452ms
VDark :1077 Scan Range: 380-780nm

1/3

The Installation:

(1) Paste Installation:
This Installation Method is Generally Used for the Waterproof Environment,
And the High-Viscosity 3m Adhesive is Attached to the Back of the Lamp Strip,
Which Can Be Directly Pasted on the Required Solid. The Surface of the Media.

Easy to Use and Easy to Install

Tear Off the Adhesive Tape

Paste to Where You Need to Install

(2) Snap-on Installation:
This Installation Method is Suitable for the Casing Waterproof Product.
The Product is Fixed by the Screw Transparent Buckle to Make the Installation Firmer.