This RF Mini RGB controller adopted the advanced computer control chip, 433 MHz Frequency technology. It can be installed & used easily, dynamic modes like jump, fade, strobe; plenty static colors all can be selected with your command. It also has memory function because we inside the memory chip on the PCB. With all these high functions, we still make it so tiny, and make it more economical and practical. It’s mainly used to control all kinds of constant voltage led lights, such as: LED source, LED strips, led wall washer, wall Glass curtain lights, etc.
- Working temperature ：-20-60℃
- Input voltage：DC5-24V
- Output：3 circuit
- Output：3 circuit
- Connection mode：Common anode
- controller size：L40.0×W12.0×H5mm
- Remote size：L85.9×W39.6×H6.9mm
- RF frequency：433.92Mhz
- Net weight：35g
- Gross weight：40g
- Static power consumption：<0.5W
- Output current：<2A*3CH(each circuit)
- Output power： 5V:<30W, 12V:<72W24v:<144w
（controller size )
Power input :5.5×2.1mm female DC connector
Signal output port:2.54mm female 4 pins connector
Direction for use:
- The match code instructions:
Press the key 2 seconds within 4 seconds when power the controller, matched success when the led strip flashing. Rematch code need power the controller again.
- Remote control function instructions:
There are 10 buttons on the remote, the functions are as below：
Auto play key. Cycle all the dynamic modes 3 times.
Static color change, and turn it into static modes from the dynamic modes.
Brightness +/-, and turn it into static modes from the dynamic mode, 5 levels.
Dynamic modes +/-, and turn it into dynamic modes from the static modes.
Speed +/-, and turn it into dynamic modes from the static modes, 10 levels.
Red, Green, blue, yellow, cyan, purple, white color keys.
3、This controller’s sequence is RGB order, in case of other sequence(BRG/GRB) will appear in the other effect. Based on sequence of RGB, pattern are as follows:
|1||7 color fade||8||Purple fade in and fade out||15||Blue blasting flash|
|2||3 color fade in and fade out||9||Blue fade in and fade out||16||Purple blasting flash|
|3||7 color fade in and fade out||10||3 Color Jump||17||Yellow blasting flash|
|4||White fade in and fade out||11||6 color Jump||18||White blasting flash|
|5||Green fade in and fade out||12||3 color flash||19||3 color blasting flash|
|6||Yellow fade in and fade out||13||Red blasting flash|
|7||Red fade in and fade out||14||Green blasting flash|
- This products Input voltage is DC5-24V,other input voltage are not allowed.
- Lead wire should be connected correctly,according to the wire color and the connecting diagram offers.
- Overload are prohibite