German
RDM/Stand-alone function/Two PWM frequency/Logarithmic or linear dimming/Numeric display/Multiple protection
Features
- Comply with the DMX512 standard
- Digital numeric display, set DMX decode start address by
- RDMfunction can realize intercommunication between DMX master and
For example, DMX decoder address can be set by DMX master console.
- PWM frequency 2000/500Hz
- Logarithmic or linear dimming curve
- Stand-alone dynamic mode and dimmer modeselectable,
which be controlled by buttons with built-in programs, instead of DMX signal.
- Over-heat/ Over-load / Short circuit protection, recover automatically
Technical Parameters
| INPUT AND OUTPUT | |
|---|---|
| Input Voltage | 12-24VDC |
| Input current | 15.5A |
| Output voltage | 12-24VDC |
| Output current | 1CH,15A |
| Output power | 180-360W |
| Output type | Constant voltage |
| SAFETY AND EMC | |
| EMC Standard (EMC) | EN55032: 2015, EN61000-3-2: 2014, EN61000-3-2: 2013, EN55024 : 2010/A1: 2015 |
| Safety Standard(LVD) | EN 61347-1: 2015 EN 61347-2-11: 2015 |
| Certification | CE, EMC, LVD |
| WARRANTY AND PROTECTION | |
| Warranty | 5 years |
| Protection | Reverse Polarity
Over-heat Over-load Short circuit |
| ENVIRONMENT | |
| Operation Temperature | Ta: -30 °C ~ +55 °C |
| Case Temperature (Max.) | Tc: +85°C |
| IP Rating | IP20 |
Mechanical Structures and Installations
Wiring Diagram
