Product Description
24-key infrared controller adopts the advanced micro control unit, it is used for controlling a variety of lamp whose source of light is LED. For instance, point source of light, flexible light strip, wall washer lamp, glass curtain wall light and so on; it has many advantages such as low price, easy connection and simplicity to use. Meanwhile, you could adjust brightness, static color choices and various dynamic changes in lighting effects through infrared remote control.
NEW function:can reorder the wire sequencing (+RGB,+GRB,+BRG)by the remote control,and now the mode changing is more soft and smooth.
External Dimension
(Controller)
(Remote control)


Technical Parameters
Working temperature | -20-60℃ |
Supply voltage | DC5V, 12V,24V optional (specify the required voltage on orders) |
0utput | 3 channels |
Connecting mode | common anode/cathode optional (specify the required voltage on orders) |
External dimension | L61*W35*H22 mm |
Packing size | L90ΧW60ΧH40mm |
Net weight | 60g |
Gross weight | 65g |
Static power consumption | <1W |
Output current | <2A(each channel) |
Output power | 5V:<30W, 12V:<72W, 24V:<144W |
Interface Specifications
Power input interface:

Adopt conventional power transposon as a DC power input interface.
Infrared receiver interface:

Connect an infrared receiver to receive an external infrared.
Load output interface:

Adopt oblate interface.
Direction for use
- Connect the load wire at first,following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;
- Operation: you will receive infrared remote control in front of infrared receiver to ensure that there is no barrier between the remote controllerand rece
The key-press functions are shown in the table as below (in accordance with the key position order):
Symbol | Key note | Symbol | Key note | Symbol | Key note | Symbol | Key note |
![]() |
Brightness +( 16 in all ) | ![]() |
Brightness–( 16 in all ) | ![]() |
Off | ![]() |
On |
![]() |
Static red | ![]() |
Static green | ![]() |
Static blue | ![]() |
Static white |
![]() |
Static orange | ![]() |
Static pea green | ![]() |
Static dark blue | ![]() |
Strobo flash |
![]() |
Static dark yellow | ![]() |
Static cyan | ![]() |
Static brown | ![]() |
7 color jumpy change |
![]() |
Static yellow | ![]() |
Static light blue | ![]() |
Static pink | ![]() |
7 color fade change |
![]() |
Static straw yellow | ![]() |
Static sky blue | ![]() |
Static purple | ![]() |
3 base color jumpy |
Direction: When switching to four dynamic mode (7 color jumpy change, Strobe flash , 7 color fade change, 3 base color jumpy), the button of “Brightness +”/ “Brightness -” means the speed of light change is up/ down, there are 32 step in all.
Typical Applications
Application Circuit:
Common Problems
Problems | Possible cause | Solution |
1. Lamp does not light after power | 1.Power cord is not properly connected, or there is not output switching power supply
2.Lamp power cord is not connected or short circuit |
1.Connect the power cord properly or replay the power
2.Connected lighting power cord |
2. After connecting some of the load the controller does not work | The connected load is too large,so that it has burned in some of the components of the controller | Replace parts of components or replace the controller |
3. After connecting to power the controller is working properly,but remote control can not work | 1. The blank on the button cell of remote controller did not pulled out
2. the remote controller do not target the receiver |
1.Take away the transparent blank
2.Target the remote controller to the receiver |
Cautions
- Supply voltage of this product is DC12V~24V, never connect to others or AC220V.
- Before using the infrared remote,the insulating film should removed.
- Lead wire should be connected correctly according to gradethat connecting diagram offers.
- This product is not to overload;
- Warranty of this product is twoyear, but exclude the artificial situation of damaged or overload working.