High CRI LED Strip Lights

Product Specifications:

Specification	LW – A0006
Product Name	5050
Lamp Total Power	60W ± 10%
LED Qty	60 PCS
Color	3000k / 4000k / 5500k
Viewing Angle	120°
PCB Color	White
CRI	CRI > 95
Life Time	>50,000 HRS
Input Voltage	DC 12V / DC24
Operating Temperature	-20℃ to +40℃

Product Details:

01. ACCURATE REFLOW WELDING PROCESS
Reflow Welding Process, Low Temperature Reflow Welding, Full and Smooth Welding, Environmental Protection and Durability.

02. PURE COPPER / DOUBLE LAYER CIRCUIT
Double Layer Pure Copper Flexible Circuit Board is Adopted to Ensure Excellent Conductivity and Extremely Long Service Life of the Lamp Strip.

03. SOFT LIGHT WITH
Using the FPC as a Soft Substrate, Can Be Arbitrary Bending Will Not Break, Easy to Shape.

SAFETY INFORMATION
·Please Consult an Electrician Before Doing Any Electrical Worker.
·The Strip and Its Components Cannot Be Mechanically Pressed.
·Correct Electrical Polarity Needs to Be Addressed.
·Pay Attention to ESD Precautions During Assembly.
·Installation Should Be Done by an Electrician.

STORAGE CONDITIONS
·The LEDs Should Be Kept at ≤30°c and ≤70%RH.
·When Storing the LEDs Use Moisture Proof Packaging.

Dimensions:

12V-60LEDs/M

24V-60LEDs/M

Connect Drawing:

Advantages:

1. R9 is Red Display, the Higher R9, the Better Effect of Irradiation in Fruit, Flowers and Other Occasions.
2. Ledworker Lighting High Cri Strip Normally Higher Than 95 and 97.
3. Cri Means Color Redering Index, R1-r15 It Make Color More Confortable, Goods More Vivid.

What’s the TLCI?

1. The TLCI Index (The Television Lighting Consistency Index) Refer to the Camera’s Ability to Distinguish Colors, Reflect the Camera, the Degree of Light Color Reception and Reproduction.

2. The TLCI Index Can Be Used to Test the Spectral Energy Distribution of the Light Source Through a Spectral Radiation Tester, and Then Use Software to Calculate the Tlci Test Result.

Waterproof Level:

Applicable to Dry Environment

Applicable to Wet Environment

Applicable to Water Environment

Applicable to Flooded Environment

The Installation:

(1) Paste Installation:
This Installation Method is Generally Used for the Waterproof Environment,
And the High-viscosity 3m Adhesive is Attached to the Back of the Lamp Strip,
Which Can Be Directly Pasted on the Required Solid. The Surface of the Media.

Easy to Use and Easy to Install

Tear Off the Adhesive Tape

Paste to Where You Need to Install

(2) Snap-on Installation:
This Installation Method is Suitable for the Casing Waterproof Product.
The Product is Fixed by the Screw Transparent Buckle to Make the Installation Firmer.