12V Individually Addressable Led Strip Lights

Addressable Led Strip Lights

GS8208 single signal control mode;
Input DC12V.
Can achieve single point single control effect;
FPC material, can be used to bend;
256 levels of grayscale changes;
Can be customized for waterproof level;
120 degree illumination without dark area;
Serial transmission, signal stability;
The pad can be cut between two pixel points;

Product Specifications:

Part NO:	B011
Produt Name	5050 RGB GS8208
Input Voltage	DC12V
LED Qty	60LEDs/m
IC	GS8208
Pixels	60Pixel
Max Power	10.8W
View Angel	120°
Color	Full color
IP Grade	IP20
Size	5M/ roll; 10M /roll

Product Details:

01. ACCURATE REFLOW WELDING PROCESS
Reflow Welding Process, Low Temperature Reflow Welding, Full and
Smooth Welding, Environmental Protection and Durability.

02. PURE COPPER / DOUBLE LAYER CIRCUIT
Double Layer Pure Copper Flexible Circuit Board is Adopted to Ensure
Excellent Conductivity and Extremely Long Service Life of the Lamp Strip.

03. SOFT LIGHT WITH
Using the Fpc as a Soft Substrate, Can Be Arbitrary Bending Will Not
Break, Easy to Shape.

SAFETY INFORMATION
· Please Consult an Electrician Before Doing Any Electrical Worker.
· the Strip and Its Components Cannot Be Mechanically Pressed.
· Correct Electrical Polarity Needs to Be Addressed.
· Pay Attention to ESD Precautions During Assembly.
· Installation Should Be Done by an Electrician.

STORAGE CONDITIONS
· The LEDs Should Be Kept at ≤86°f and ≤70%RH.
· When Storing the LEDs Use Moisture Proof Packaging.

Dimensions:

12V-60 LEDs/M

Connect Drawing:

Waterproof Level:

Applicable to Dry Environment

Applicable to Wet Environment

Applicable to Water Environment

Applicable to Flooded Environment

The Installation:

(1) Paste Installation:
This Installation Method is Generally Used for the Waterproof Environment,
And the High-viscosity 3m Adhesive is Attached to the Back of the Lamp Strip,
Which Can Be Directly Pasted on the Required Solid. The Surface of the Media.

Easy to Use and Easy to Install

Tear Off the Adhesive Tape

Paste to Where You Need to Install

(2) Snap-on Installation:
This Installation Method is Suitable for the Casing Waterproof Product.
The Product is Fixed by the Screw Transparent Buckle to Make the Installation Firmer.