Product Specifications:
| Product Name: | COB Led Strip | COB Led Strip | COB Led Strip | COB Led Strip |
|---|---|---|---|---|
| Part NO: | LW-COB002 | LW-COB003 | LW-COB004 | LW-COB005 |
| LED Qty: | 378 PCS | 378 PCS | 504 PCS | 504 PCS |
| CRI (RA) | 80 | 90 | 80 | 90 |
| Input Voltage: | DC24V /12 | DC24V / 12 | DC24V /12 | DC24V /12 |
| Watts: | 14W | 14W | 14W | 14W |
| Luminous Flux: | 107LM / W | 107LM / W | 107LM / W | 107LM / W |
| Color: | 2700 / 3000 / 4000 / 6000K | 2700 / 3000 / 4000 / 6000K | 2700 / 3000 / 4000 / 6000K | 2700 / 3000 / 4000 / 6000K |
| PCB Color: | White | White | White | White |
| IP Grade: | IP20 | IP20 | IP20 | IP20 |
| Operating Temperature: | .-25 to 45℃ | .-25 to 45℃ | .-25 to 45℃ | .-25 to 45℃ |
| Beam Angle: | 180 Degree | 180 Degree | 180 Degree | 180 Degree |
| Certification: | CE; RoHS | CE; RoHS | CE; RoHS | CE; RoHS |
| Max Run: | 5M | 5M | 5M | 5M |
| Min Run: | 24V 55.5mm 12V 23.8mm |
24V 55.5mm 12V 23.8mm |
24V 41.67mm 12V 17.85mm |
24V 41.67mm 12V 17.85mm |
| Dimension: | 5000 x 10 x 2.2mm | 5000 x 10 x 2.2mm | 5000 x 10 x 2.2mm | 5000 x 10 x 2.2mm |
Product Details:
01. RESISTANCE
Using SMD Resistors 128 and the Unique Arrangement to Better Protect the Light Emtting.
02. 22AGW PURE COPPER WIRE
Welding is Firm, Good Overcurrent PVC Wire.
03. SOFTNESS
The Light Belt is Based on a Very Soft FPC Which Can.
Be Flexed and Will Not Be Broken.
04. CHIP
Without any Light Dot or Spot. Light Soft, Nodazzling.
Arbitrarily Bending: Flip Chip Smaller Bendable Angle .
180 Big View Angle.
1. 2110 Highlighter Chip
2. Safety Resistor Ballast Stabilizer Protection Chip
3. Can Be Cut Out Soft Light Belt Simple and Fast
Dimensions:
SAFETY INFORMATION
· Please Consult an Electrician Before Doing Any Electrical Worker.
· The Strip and Its Components Cannot Be Mechanically Pressed.
· Correct Electrical Polarity Needs to Be Addressed.
· Pay Attention to ESD Precautions During Assembly.
· Installation Should Be Done by an Electrician.
STORAGE CONDITIONS
· The LEDs Should Be Kept at ≤86°f and ≤70%RH.
· When Storing the LEDs Use Moisture Proof Packaging.
24V-576 LEDs/M
Connect Drawing:
Waterproof Level:
Applicable to Dry Environment
Applicable to Wet Environment
Applicable to Water Environment
Applicable to Flooded Environment
The Installation:
(1) Paste Installation:
This Installation Method is Generally Used for the Waterproof Environment,
And the High-viscosity 3M Adhesive is Attached to the Back of the Lamp Strip,
Which Can Be Directly Pasted on the Required Solid. The Surface of the Media.
Easy to Use and Easy to Install
Tear Off the Adhesive Tape
Paste to Where You Need to Install
(2) Snap-on Installation:
This Installation Method is Suitable for the Casing Waterproof Product.
The Product is Fixed by the Screw Transparent Buckle to Make the Installation Firmer.
Accessories (Clips+Screw+Screwd-Diver)
Glue the End-Cap on the Strip
Put the Clips on the Strip
Fixed the Clips
Accessories :
Hippo Buckle
Controller
Aluminum Trough
Power Supply
Application:
Packaging:
