DMX Programmable LED Strips

Product Specifications:

Product Name:	DMX512 led strip	DMX512 led strip	DMX512 led strip	DMX512 led strip	DMX512 led strip
Part NO:	LW – A5120	LW – A5123	LW – A5126	LW – A5132	LW – A5138
LED Qty:	34PCS	42PCS	30 PCS	60 PCS	60 PCS
IC Qty:	34PCS	42PCS	10 PCS	10 PCS	10 PCS
Input Voltage:	5V	5V	12V	24V	24V
Watts:	10.2W / M	12.6W / M	7.2W / M	14.4W / M	19.2W / M
Color:	RGB	RGB	RGB	RGB	RGBW
PCB Color:	White	White	White	White	White
IP Grade:	IP20	IP20	IP20	IP20	IP20
Operating Temperature:	.-25 to 45℃	.-25 to 45℃	.-25 to 45℃	.-25 to 45℃	.-25 to 45℃
Beam Angle:	180 Degree	180 Degree	180 Degree	180 Degree	180 Degree
CertificAtion:	CE; RoHS, REACH	CE; RoHS, REACH	CE; RoHS, REACH	CE; RoHS, REACH	CE; RoHS, REACH
Max Run:	5M	5M	5M	5M	5M
Dimension:	5000 x 10 x 4mm	5000 x 10 x 4mm	5000 x 10 x 4mm	5000 x 10 x 4mm	5000 x 12 x 4mm

01. ACCURATE REFLOW WELDING PROCESS
Reflow Welding Process, Low Temperature Reflow Welding, Full and
Smooth Welding, Environmental Protection and Durability.

02. PURE COPPER / DOUBLE LAYER CIRCUIT
Double Layer Pure Copper Flexible Circuit Board is Adopted to Ensure
Excellent Conductivity and Extremely Long Service Life of the Lamp Strip.

03. SOFT LIGHT WITH
Using the Fpc as a Soft Substrate, Can Be Arbitrary Bending Will Not
Break, Easy to Shape.

SAFETY INFORMATION
· Please Consult an Electrician Before Doing Any Electrical Worker.
· The Strip and Its Components Cannot Be Mechanically Pressed.
· Correct Electrical Polarity Needs to Be Addressed.
· Pay Attention to ESD Precautions During Assembly.
· Installation Should Be Done by an Electrician.

STORAGE CONDITIONS
· The Leds Should Be Kept at ≤86°f and ≤70%RH.
· When Storing the LEDs Use Moisture Proof Packaging.

Dimensions:

24V-60 LEDs/M

Connect Drawing:

Note: Pls Connect Power Supply on Both Side If the Length More Than 8M Per Pcs.

Waterproof Level:

Applicable to Dry Environment

Applicable to Wet Environment

Applicable to Water Environment

Applicable to Flooded Environment

The Installation:

(1) Paste Installation:

This Installation Method is Generally Used for the Waterproof Environment,
And the High-Viscosity 3M Adhesive is Attached to the Back of the Lamp Strip,
Which Can Be Directly Pasted on the Required Solid. The Surface of the Media.

Easy to Use and Easy to Install

Tear Off the Adhesive Tape

Paste to Where You Need to Install

(2) Snap-on Installation:

This Installation Method is Suitable for the Casing Waterproof Product.
The Product is Fixed by the Screw Transparent Buckle to Make the Installation Firmer.