Product characteristic:
- 5V, RGB, built-in IC, one light and one control
- Data transmission 40MHZ/S, PWM refresh rate 27KHZ/S.
- HD107S is cost-effective, popular in the market, and has a large shipment volume.
- The pressure drop is 50% lower than similar products.
Product Specifications:
Part No: | Input Voltage | IC type | LED Quantity | IC QTY | PCB width: | Color | Max Power | Min Cut | IP Grade | Control signal: |
LW-D0011 | 5V | 30 | 30leds/m | 30 | 10mm | Addressable RGB | 9W/M | 33.3mm | IP20 | SPI |
LW-D0012 | 5V | 60 | 60leds/m | 60 | 12mm | Addressable RGB | 18W/M | 16.66mm | IP20 | SPI |
LW-D0013 | 5V | 72 | 72leds/m | 72 | 12mm | Addressable RGB | 21.6W/M | 13.88mm | IP20 | SPI |
LW-D0014 | 5V | 96 | 96leds/m | 96 | 12mm | Addressable RGB | 28.8W/M | 10.41mm | IP20 | SPI |
LW-D0015 | 5V | 144 | 144leds/m | 144 | 12mm | Addressable RGB | 42W/M | 6.94mm | IP20 | SPI |
Products Details:
01 . 5V, RGB, built-in IC, one light and one control
This is 5V addressable led strips, it’s RGB type, inside IC, one light control individually. HD107S has built-in IC SMD LED, each LED is addressable, one IC control each LED can be controlled individually.



02 . Different between APA102 and HD107S
- HD107s RGB 5050 LED refersh Rate 27KHZ,Transmission Rate 40M HZ
- APA102 refersh Rate 20KHZ Transmission Rate30mHZ
- HD107S, high brightness, low voltage drop,APA102, low brightness, obvious voltage drop


03 . Data transmission 40MHZ/S, PWM refresh rate 27KHZ/S.
The controller controls the circuit on the FPCB circuit board through the IC chip to achieve the effect of LED lighting, (chasing, running water, running discoloration, breathing, flashing, clockwise horse racing), running counterclockwise, simulating lightning, fixing color, etc., Data transmission 40MHZ/S, PWM refresh rate 27KHZ/S.can be suitable for customers to use in home decoration, bar, KTV decoration, garden landscape, sports venues, exhibition halls, hotels, villas and other use environments.

04 . Wiring: HD107S 4PIN
- HD107S Wiring:4PIN Connector and extra red / black power wires,red wire 5V (V+) yellow wire: signal wire, green wire: Backup data signal input, black wire: ground wire GND) The extra two are spare power cables, red 5V (V+), black 5V negative (V-)

05 . Customizable in various sizes
Cutting and welding is convenient and free: each LED can form a loop, which can be arbitrarily cut and welded along the above tangent to meet the needs of various light strip lengths required by customers


06 . Waterproof levels
It can be made into a variety of waterproof levels, dripping waterproof (IP65), all-inclusive casing waterproof (IP67), plastic injection in the casing (IP68), and the latest extrusion molding (IP68)

07 . Flexible PCB
- HD107S Using the most flexible FPC as the base material, FPC has good electrical conductivity, fast heat dissipation, bending resistance, and can be arbitrarily bent into any shape。
- Double Layer Pure Copper Flexible Circuit Board is Adopted to Ensure Excellent Conductivity and Extremely Long Service Life of the Lamp Strip.
Dimensions:
5V-30 LEDs/M
5V-60 LEDs/M
5V-144 LEDs/M
Connect Drawing:
The Installation:
(1) Paste Installation:
This Installation Method is Generally Used for the Waterproof Environment,
And the High-viscosity 3m Adhesive is Attached to the Back of the Lamp Strip,
Which Can Be Directly Pasted on the Required Solid. The Surface of the Media.

Easy to Use and Easy to Install

Tear Off the Adhesive Tape

Paste to Where You Need to Install
(2) Snap-on Installation:
This Installation Method is Suitable for the Casing Waterproof Product.
The Product is Fixed by the Screw Transparent Buckle to Make the Installation Firmer.

Accessories (Clips+Screw+Screwd-Diver)

Put the Clips on the Strip

Fixed the Clips
SAFETY INFORMATION
· Please Consult an Electrician Before Doing Any Electrical Worker.
· the Strip and Its Components Cannot Be Mechanically Pressed.
· Correct Electrical Polarity Needs to Be Addressed.
· Pay Attention to ESD Precautions During Assembly.
· Installation Should Be Done by an Electrician.
STORAGE CONDITIONS
· The LEDs Should Be Kept at ≤86°f and ≤70%RH.
· When Storing the LEDs Use Moisture Proof Packaging.

Accessories Display:
Application Scenario:
Packaging:




Box Size: 11*106*24cm Weight: IP20: 8KG IP65/IP67: 11KG