Product characteristic:
- 12V, RGB, built-in IC, one light and one control
- WS2815B is cost-effective, popular in the market, and has a large shipment volume.
- WS2815B with breakpoint resume function, reduce maintenance costs
Product Specifications:
Part No: | Input Voltage | IC type | LED Quantity | IC QTY | PCB width: | Color | Max Power | Min Cut | IP Grade | Control signal: |
LW-D0018 | 12V | 30 | 30leds/m | 30 | 10mm | Addressable RGB | 9W/M | 33.3mm | IP20 | SPI |
LW-D0019 | 12V | 60 | 60leds/m | 60 | 12mm | Addressable RGB | 18W/M | 16.66mm | IP20 | SPI |
LW-D0020 | 12V | 72 | 72leds/m | 72 | 12mm | Addressable RGB | 21.6W/M | 13.88mm | IP20 | SPI |
LW-D0021 | 12V | 96 | 96leds/m | 96 | 12mm | Addressable RGB | 28.8W/M | 10.41mm | IP20 | SPI |
LW-D0022 | 12V | 144 | 144leds/m | 144 | 12mm | Addressable RGB | 42W/M | 6.94mm | IP20 | SPI |
Product Details:
01 . 12V, RGB, built-in IC, one light and one control
- WS2815B Using SMD5050 built-in IC SMDto achieve addressable and programmable digital led strips, which greatly reduces the use of external components, making the product look simpler and more beautiful to the greatest extent.


Built-in IC

External IC
02 . WS2815B with breakpoint resume function, reduce maintenance costs
The WS2815B can continuously transmit the signal in the event of a signal interruption, if any Pixel on the strip is disconnected, the circuit will remain off, while the other Pixels will continue to glow. As long as the other adjacent Pixels are not damaged, the other Pixels will work fine.

03 . Flexible PCB
- WS2815 Using the most flexible FPC as the base material, FPC has good electrical conductivity, fast heat dissipation, bending resistance, and can be arbitrarily bent into any shape。
- Double Layer Pure Copper Flexible Circuit Board is Adopted to Ensure Excellent Conductivity and Extremely Long Service Life of the Lamp Strip.



04 . Wiring:4PIN
WS2815 Wiring:4PIN Connector and extra red / black power wires,red wire 12V (V+) yellow wire: signal wire, green wire: Backup data signal input, black wire: ground wire GND) The extra two are spare power cables, red 12V (V+), black 12V negative (V-)

05 . Customizable in various sizes
Cutting and welding is convenient and free: each LED can form a loop, which can be arbitrarily cut and welded along the above tangent to meet the needs of various light strip lengths required by customers


06 . Waterproof levels
It can be made into a variety of waterproof levels, dripping waterproof (IP65), all-inclusive casing waterproof (IP67), plastic injection in the casing (IP68), and the latest extrusion molding (IP68)

Dimensions:
Connect Drawing:
The Installation:
(1) Paste Installation:
This Installation Method is Generally Used for the Waterproof Environment,
And the High-Viscosity 3M Adhesive is Attached to the Back of the Lamp Strip,
Which Can Be Directly Pasted on the Required Solid. The Surface of the Media.

Easy to Use and Easy to Install

Tear Off the Adhesive Tape

Paste to Where You Need to Install
(2) Snap-on Installation:
This Installation Method is Suitable for the Casing Waterproof Product.
The Product is Fixed by the Screw Transparent Buckle to Make the Installation Firmer.

Accessories (Clips+Screw+Screwd-Diver)

Put the Clips on the Strip

Fixed the Clips
SAFETY INFORMATION
· Please Consult an Electrician Before Doing Any Electrical Worker.
· the Strip and Its Components Cannot Be Mechanically Pressed.
· Correct Electrical Polarity Needs to Be Addressed.
· Pay Attention to ESD Precautions During Assembly.
· Installation Should Be Done by an Electrician.
STORAGE CONDITIONS
· The LEDs Should Be Kept at ≤86°f and ≤70%RH.
· When Storing the LEDs Use Moisture Proof Packaging.

Accessories Display:
Application Scenario:
Packaging:




Box Size: 11*106*24cm Weight: IP20: 8KG IP65/IP67: 11KG