SK6812 RGBW Arduino LED Strip

SK6812, WS2812B, P923F IC Type

1. Built-in IC RGBW
2. A Data Line, Positive and Negative, Two Power Lines, 10mm Wide PCB, Built-in IC, 256 Gray Grade, by the Controller, Get Text, Numbers, English, Pictures, Animation and Any Other Effect.
3. No Break-Point Continuous Transmission.
4. 5v Input, Individual Controller.

Description

Product Specifications:

Item	Part No.	Operating Voltage	LED Type Color	LED QTY	IC QTY	Max Power	Gray Grade	Pixels	IP	Min. Cut / mm
30 LEDs/M	A2821-RGBW	5V	5050 SMD RGBW	30	30	9W/M	256	30	IP20	33.33
60 LEDs/M	A2818-RGBW	5V	5050 SMD RGBW	60	60	18W/M	256	60	IP20	16.67
74 LEDs/M	A2815-RGBW	5V	5050 SMD RGBW	74	74	21.6W/M	256	74	IP20	13.51
144 LEDs/M	A2812-RGBW	5V	5050 SMD RGBW	144	144	42W/M	256	144	IP20	6.94

Product Details:

01. ACCURATE REFLOW WELDING PROCESS
Reflow Welding Process , Low Temperature Reflow Welding, Full and Smooth Welding, Environmental Protection and Durability.

02. PURE COPPER / DOUBLE LAYER CIRCUIT
Double Layer Pure Copper Flexible Circuit Board is Adopted to Ensure Excellent Conductivity and Extremely Long Service Life of the Lamp Strip.

03. SOFT LIGHT WITH
Using the FPC as a Soft Substrate, Can Be Arbitrary Bending Will Not Break, Easy to Shape.

SAFETY INFORMATION
· Please Consult an Electrician Before Doing Any Electrical Worker.
· The Strip and Its Components Cannot Be Mechanically Pressed.
· Correct Electrical Polarity Needs to Be Addressed.
· Pay Attention to ESD Precautions During Assembly.
· Installation Should Be Done by an Electrician.

STORAGE CONDITIONS
· The LEDs Should Be Kept at ≤86°f and ≤70%rh.
· When Storing the LEDs Use Moisture Proof Packaging.

Connect Drawing:

Waterproof Level:

Applicable to Dry Environment

Applicable to Wet Environment

Applicable to Water Environment

Applicable to Flooded Environment

The Installation:

(1) Paste Installation:
This Installation Method is Generally Used for the Waterproof Environment,
And the High-viscosity 3M Adhesive is Attached to the Back of the Lamp Strip,
Which Can Be Directly Pasted on the Required Solid. The Surface of the Media.

Easy to Use and Easy to Install

Tear Off the Adhesive Tape

Paste to Where You Need to Install

(2) Snap-on Installation:
This Installation Method is Suitable for the Casing Waterproof Product.
The Product is Fixed by the Screw Transparent Buckle to Make the Installation Firmer.