1. Quickly connect the led strip light , can be directly connected.
2. Easy to use, easy to install and understand, connect any 12-24V low voltage power supply.
3. Any length of led strip light can be cut to facilitate connection, fast and safe connection.
4. Solder-free , improve the traditional process welding technology, reduce the traditional labor cost.
5. Diversified and multi-angle extension connection can be realized in the installation of the led strip light , solving the limitations of the installation of the led strip light placement.
6. Quick and easy maintenance, can quickly replace the broken led stip light at will.
7. Please pay attention to the positive and negative polarity of the led strip light and the solder-free connector when connecting
2PIN/3PIN/4PIN/5PIN/6PIN Middle Connector With 15CM Cable
2pin & 4pin Middle Connector With 15CM Cable
（1）first open the gland, open as shown in the figure. The red line connects to the positive terminal of the strip +, the black line connects to the negative terminal –
（2）adjust the direction of the strip, so that the strip “+” corresponds to the red line, the strip from the card slot into the pad of the strip pressure to the shrapnel.one-to-one correspondence, and push the light strip into the connector
（3）pay attention to the strip with adhesive backing, there will be a group force when installed into the slot, do not use brute force to force the installation.
（4）ensure that the +/- pole of the strip and the red and black lines correspond, and the tabs pressed to the pad of the strip before buckling the pressure band.