44-key infrared controller adopts the advanced micro control unit, it is used for controlling a variety of lamp whose source of light is LED. For instance, point source of light, flexible light strip, wall washer lamp, glass curtain wall light and so on; it has many advantages such as low price, easy connection and simplicity to use. Meanwhile, you could adjust brightness, static color choices, customize any color and various dynamic changes in lighting effects through infrared remote control.
NEW function: can used the remote the reorder the wire sequencing (+RGB,+GRB,+BRG)
Adopt conventional power transposon as a DC power input interface.
Infrared receiver interface:
Adopt oblate three-way wire，and connect an infrared receiver to receive an external infrared.
Load output interface:
Adopt oblate interface.
Direction for use
- Connect the load wire at first,following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power；
- Operation: you will receive infrared remote control in front of infrared receiver to ensure that there is no barrier between the remote controllerand rece
The key-press functions are shown in the table as below (in accordance with the key position order):
|Brightness rise||Brightness fall||Pause/Run||On/Off|
|Static red||Static green||Static blue||Static white|
|Static orange||Static light green||Static dark blue||Static milk white|
|Static dark yellow||Static cyan||Static lyons blue||Static white pink|
|Static yellow||Static light blue||Static purple||Static green-white|
|Static light yellow||Static sky blue||Static brown||Static blue white|
|Increase red||Increase green||Increase blue||Speed up|
|Decrease red||Decrease green||Decrease blue||Speed-down|
|DIY key1||DIY key2||DIY key3||Automatic change|
|DIY key4||DIY key5||DIY key6||Flash on and off|
|3 color jumpy change||7 color jumpy change||3 color fade change||7 color fade change|
Supplement：About DIY key, when it’s pressed first time, will enter the DIY color mode, you can adjust the color per the 6 keys at above to increase or decrease the R/G/B color by yourself freely（if other key is pressed this time，will jump out from DIY color mode）. And you can save the color which you have adjusted by pressing the DIY key once again. When next time this key is pressed, it will show the color you saved last time.
There are 6 DIY keys, so you can save 6 colors you like. They are all Independent, have no effect each other. For example: if you press DIY key1 first, and then press DIY key2, DIY key1 will be invalid, until DIY key2 is pressed once again, current color will be saved.
|1. Lamp does not light after power||1.Power cord is not properly connected, or there is not output switching power supply
2.Lamp power cord is not connected or short circuit
|1.Connect the power cord properly or replay the power
2.Connected lighting power cord
|2. After connecting some of the load the controller does not work||The connected load is too large，so that it has burned in some of the components of the controller||Replace parts of components or replace the controller|
|3. After connecting to power the controller is working properly，but remote control can not work||1. The blank on the button cell of remote controller did not pulled out
2. the remote controller do not target the receiver
|1.Take away the transparent blank
2.Target the remote controller to the receiver
- Supply voltage of this product is DC12V, never connect to others or AC220V.
- Before using the infrared remote,the insulating film should removed.
- Lead wire should be connected correctly according to gradethat connecting diagram offers.
- This product is not to overload;
- 5. Warranty of this product is twoyear, but exclude the artificial situation of damaged or overload working.