Features Details Video Installation Accessories FAQ

Product Features:

1.R9 > 95
2.USE Epistar 2835SMD
3.60 PCS, 120 PCS LED Per Meter
4.High CRI >= 96. Every LEDs
5.Color: 2600-2800K 2900-3200K
3800-4300K 5000-5500K 6000-6500K

Product Specifications:

Specification
LW – A0006
Product Name
5050
Lamp Total Power
60W ± 10%
LED Qty
60 PCS
Color
3000k / 4000k / 5500k
Viewing Angle
120°
PCB Color
White
CRI
CRI > 95
Life Time
>50,000 HRS
Input Voltage
DC 12V / DC24
Operating Temperature
-20℃ to +40℃

 

Product Details:

01. ACCURATE REFLOW WELDING PROCESS
Reflow Welding Process, Low Temperature Reflow Welding, Full and Smooth Welding, Environmental Protection and Durability.

02. PURE COPPER / DOUBLE LAYER CIRCUIT
Double Layer Pure Copper Flexible Circuit Board is Adopted to Ensure Excellent Conductivity and Extremely Long Service Life of the Lamp Strip.

03. SOFT LIGHT WITH
Using the FPC as a Soft Substrate, Can Be Arbitrary Bending Will Not Break, Easy to Shape.

SAFETY INFORMATION
·Please Consult an Electrician Before Doing Any Electrical Worker.
·The Strip and Its Components Cannot Be Mechanically Pressed.
·Correct Electrical Polarity Needs to Be Addressed.
·Pay Attention to ESD Precautions During Assembly.
·Installation Should Be Done by an Electrician.

STORAGE CONDITIONS
·The LEDs Should Be Kept at ≤30°c and ≤70%RH.
·When Storing the LEDs Use Moisture Proof Packaging.

Dimensions:

12V-60LEDs/M

24V-60LEDs/M

Connect Drawing:

Advantages:

1. R9 is Red Display, the Higher R9, the Better Effect of Irradiation in Fruit, Flowers and Other Occasions.
2. Ledworker Lighting High Cri Strip Normally Higher Than 95 and 97.
3. Cri Means Color Redering Index, R1-r15 It Make Color More Confortable, Goods More Vivid.
 

 

What’s the TLCI?

1. The TLCI Index (The Television Lighting Consistency Index) Refer to the Camera’s Ability to Distinguish Colors, Reflect the Camera, the Degree of Light Color Reception and Reproduction.

2. The TLCI Index Can Be Used to Test the Spectral Energy Distribution of the Light Source Through a Spectral Radiation Tester, and Then Use Software to Calculate the Tlci Test Result.

Waterproof Level:

Applicable to Dry Environment

Applicable to Wet Environment

Applicable to Water Environment

Applicable to Flooded Environment

The Installation:

(1) Paste Installation:
This Installation Method is Generally Used for the Waterproof Environment,
And the High-Viscosity 3m Adhesive is Attached to the Back of the Lamp Strip,
Which Can Be Directly Pasted on the Required Solid. The Surface of the Media.

Easy to Use and Easy to Install

Tear Off the Adhesive Tape

Paste to Where You Need to Install

(2) Snap-on Installation:
This Installation Method is Suitable for the Casing Waterproof Product.
The Product is Fixed by the Screw Transparent Buckle to Make the Installation Firmer.

Accessories (Clips+Screw+Screwd-Diver)

Put the Clips on the Strip

Fixed the Clips

Accessories Display:

Hippo Buckle

Controller

Aluminum Trough

Power Supply

Application Scenario:

Packaging:

Box Size: 11 * 106 * 24cm  Weight: IP20: 8KG IP65 / IP67: 11KG

5 of the Most Common Customer Questions (FAQ)

1 , Can the High CRI LED Strip be Waterproof?

High CRI strips are generally not waterproof with glue, because the glue for waterproof glue is silicone, which will slightly change the color of the light strip and change the display index of the light strip. Therefore, it is not recommended for the strip to be waterproof with IP65 glue, and the casing and extrusion glue are good choices, which can achieve the waterproof function without affecting the CRI.

2,Can the High CRI LED Strip be cut?

The High CRI led strip can be cut like other SMD strips. Cut according to the position of the scissors.

3,Working life of High CRI LED Strip

The service life of High CRI led strip is the same as that of ordinary LED strip, which is 50,000 hours.

4 , What are the color temperature segments of the conventional High CRI LED Strip?

High CRI > 95. Color: 2600-2800K   2900-3200K   3800-4300K    5000-5500K    6000-6500K

5,How to install High CRI LED Strip

(1) Paste Installation:
This Installation Method is Generally Used for the Waterproof Environment,
And the High-Viscosity 3m Adhesive is Attached to the Back of the Lamp Strip,
Which Can Be Directly Pasted on the Required Solid. The Surface of the Media.

(2) Snap-on Installation:
This Installation Method is Suitable for the Casing Waterproof Product.
The Product is Fixed by the Screw Transparent Buckle to Make the Installation Firmer.