Features Details Video Installation Accessories FAQ

Product Features:

Full spectrum grow light: This grow light strips can provide full spectrum from 380nm up to 780nm (just like natural sunlight) which has been proven that it can promote photosynthesis, thereby effectively promoting indoor plant growth.

1. Safety & Healthy for Your Plants
2. Large Coverage for your plants which need enough light for grow
3. Make your plants grow faster and healthier

Product Specifications:

Part NO. A0052
LED 2835
Quantity 120 SMD / M
IP Rank IP20
Color R, Y, B, G, CW, WW, PW
PCB Color White
CRI CRI > 95
Power ( For 5M ) 75W ± 10%
Dimension 5000 * 8 * 2.3mm

Product Details:

01. RESISTANCE
Reflow Welding Process, Low Temperature Reflow Welding, Full and Smooth Welding, Environmental Protection and Durability.

02. 22AGW PURE COPPER WIRE
Welding is Firm, Good Overcurrent PVC Wire.

03. SOFT LIGHT WITH
Using the FPC as a Soft Substrate, Can Be Arbitrary Bending Will Not
Break, Easy to Shape.

SAFETY INFORMATION
· Please Consult an Electrician Before Doing Any Electrical Worker.
· The Strip and Its Components Cannot Be Mechanically Pressed.
· Correct Electrical Polarity Needs to Be Addressed.
· Pay Attention to ESD Precautions During Assembly.
· Installation Should Be Done by an Electrician.

STORAGE CONDITIONS
·The LEDs Should Be Kept at ≤86°F and ≤70%RH.
·When Storing the LEDs use mMisture Proof Packaging.

Defining Full Spectrum

High CRI type, based on 90, even RA > 99

Full-spectrum light, excellent color rendition ability with typical optical parameters of Ra (avg R1~R8)=97, Ra’(avg R1~R15)=95, R9≥90, Rf (Fidelity Index)=95, Rg (Relative Gamut Index)=100, specific for high chromaticity application.

Truly full spectrum light sources, by virtue of being similar to natural daylight, must have a very high CRI be considered a true, full spectrum light source.

Apply to Most Plants: This full spectrum LED grow light produces lights of all kinds of wavelengths plants need in sprouting, growing and blossoming, just like the sun! Suitable for most plants, don’t need to think about which wavelength of lights would fit your plants, this grows light will solve this problem for you.

Wide Application: Used as plant growth supplementary lighting. Widely used in the vegetable greenhouse, vegetables, and fruits, floriculture, propagation, city farming

LED  Test Report

                                                  Product Mark                                                                                             Humidity : 65%

                                                  Product Ty: 12V  2835 120  2700K                                               Test Date : 2021-06-09 17:14:24           

                                                   Manufacturer:                                                                                           Temperature: C’

Chroma Parameters
Chro.Coor.: x=0.4626    y=0.4172                                    u=0.2613       v=0.3535        duv=0.0022
CCT: Tc= 2713K     Dominant Wave.: 583.5nm        Purity: 64.1%           Centre Wave:615.5nm
Flux RGB Ratio: R=26.3%,G=72.0%,B=1.7%            Peak Wave.: 635.7nm            Half Width: 151.7nm

Rendering Index: Ra= 97.4   CRI=96.4

     R1 =99    R2 =99    R3 =98     R4 =97     R5 =98    R6 =97    R7 =96
     R8 =96    R9 =91    R10=99    R11=96    R12=86   R13=99   R14=98         R15=98 

    Fridelity Index(RF)=90.5            Gamut Index(Rg)=96.8

Photo Parameters
    Flux: 1121.21lm                Effi.:  74.21lm/W            Radiant:  4318.1mW            Iv: 0.0mcd

Ele. Parameters
    Voltage: U=12.00V                                      Current: I=1.2590A

    Power:P=15.120W                                      Power Factor:PF =1.000

Instrument state
     Instrument:Hopoo HP8000S            Integral Time:99.452ms
    VDark :1077                                                 Scan Range: 380-780nm

1/3

 

Dimensions:

120LEDs/M

Connect Drawing:

Waterproof Level:

Applicable to Dry Environment

Applicable to Wet Environment

Applicable to Water Environment

Applicable to Flooded Environment

The Installation:

(1) Paste Installation:
This Installation Method is Generally Used for the Waterproof Environment,
And the High-Viscosity 3m Adhesive is Attached to the Back of the Lamp Strip,
Which Can Be Directly Pasted on the Required Solid. The Surface of the Media.

Easy to Use and Easy to Install

Tear Off the Adhesive Tape

Paste to Where You Need to Install

(2) Snap-on Installation:
This Installation Method is Suitable for the Casing Waterproof Product.
The Product is Fixed by the Screw Transparent Buckle to Make the Installation Firmer.

Accessories (Clips+Screw+Screwd-Diver)

Put the Clips on the Strip

Fixed the Clips

Accessories Display:

Hippo Buckle

Controller

Aluminum Trough

Power Supply

Application Scenario:

Packaging:

Box Size: 11 * 106 * 24cm  Weight: IP20: 8KG IP65 / IP67: 11KG

5 of the Most Common Customer Questions (FAQ)

1 , Can the High CRI LED Strip be Waterproof?

High CRI strips are generally not waterproof with glue, because the glue for waterproof glue is silicone, which will slightly change the color of the light strip and change the display index of the light strip. Therefore, it is not recommended for the strip to be waterproof with IP65 glue, and the casing and extrusion glue are good choices, which can achieve the waterproof function without affecting the CRI.

2,Can the High CRI LED Strip be cut?

The High CRI led strip can be cut like other SMD strips. Cut according to the position of the scissors.

3,Working life of High CRI LED Strip

The service life of High CRI led strip is the same as that of ordinary LED strip, which is 50,000 hours.

4 , What are the color temperature segments of the conventional High CRI LED Strip?

High CRI > 95. Color: 2600-2800K   2900-3200K   3800-4300K    5000-5500K    6000-6500K

5,How to install High CRI LED Strip

(1) Paste Installation:
This Installation Method is Generally Used for the Waterproof Environment,
And the High-Viscosity 3m Adhesive is Attached to the Back of the Lamp Strip,
Which Can Be Directly Pasted on the Required Solid. The Surface of the Media.

(2) Snap-on Installation:
This Installation Method is Suitable for the Casing Waterproof Product.
The Product is Fixed by the Screw Transparent Buckle to Make the Installation Firmer.