Addressable RGB CCT COB Led Strip
*Beam angle 180 degree
*High density LED,no light spot
*New tech against traditional strips
* 3M 300LSE adhesive tape for easy intallation.
* Standard 5M on reel,also could make 10M, 20M one reel.
* CE,RoHS,UL, 3 years warranty.
* Different waterproof grade can meet requirements in different environments
The COB led strip is a very good used for cover, Cabinet & Furniture soffit lighting, showcase and display path and contour making. Edge, and back lighting.
|LED Qty:||840pcs per meter|
|IC Qty:||10 pcs IC|
|Operating temperature:||.-25 to 45℃|
|Beam angle:||180 degree|
|Min Run:||24V 100mm|
COB led strip are 180 degree viewing angle. SMD LED Strip type is normally 120 degree viewing angle.
Put the chips on board then put Phosphor on chips let the viewing angle bigger, then it’s less dark zone
With our experience engineer team. we can keep excellent CCT uniformity for continuous orders. and keep Color- Consistency: 3 SDCM.
Ensure your every orders same color, and continuouse provide super work for your customers.
We pay attention to every details, the connect cable we use 22AWG pure copper wire. Always keep 3/8”stripped off the end of the LED for wiring purposes.
4. Excellent Iinear Iighting performance, Dot FREE.
2835SMD Led Strip With Aluminum Profile:
COB SMD Led Strip With Aluminum Profile:
Non waterproof type
Extruded Silicone waterproof
Put in tube waterproof
6. Very nice color and it’s main color temperature.
Box Size: 43*43*35cm 100 reels per box
Weight: IP20: 12KG
The full name of the COB led strip is: Chip On Board, which is a method of directly binding the LED chips to the PCB board.
Yes, COB LED STRIP can be cut.
Yes, it’s can be dimmable with dimmer controller.
This is determined by the difference in the manufacturing process of COB LED STRIP and SMD light strips. The production process of SMD led strip is to first produce SMD lamp beads, and then split each lamp bead, and make the light bead after light separation to achieve color consistency on the same board. The COB LED STRIP is to flip the chip on the PCB board, and then drop the phosphor to achieve white light. Without the steps of light splitting, there is no way to achieve the consistency of the SMD led strip.
Because the chips of the COB LED STRIP are too dense, it will affect the heat dissipation, so the power cannot be made too large, at most 14W per meter, and the SMD lamp beads of the SMD led strip have brackets, which can dissipate heat and can achieve 18W.
At present, the highest luminous efficiency of COB LED STRIP is: 120LM/W. SMD has a high-power lamp bead that can achieve 160-170LM/W. If the power requirement exceeds 120LM, you still need to choose a high-brightness SMD led strip.