Features

  • Comply with the DMX512 standard protocols.
  • Digital numeric display, set DMX decode start address by buttons.
  • RDM function can realize intercommunication between

DMX master and decoder. For example,

DMX decoder address can be set by DMX master console.

  • PWM frequency 2000/500Hz selectable.
  • Logarithmic or linear dimming curve selectable.
  • Stand-alone 12ch RGB mode and 12 channel dimmer mode selectable,

which be controlled by buttons with built-in programs, instead of DMX signal.

Technical Parameters

Input and Output
Input voltage 12-24VDC
Input current 60.5A
Output voltage 12 x (12-24)VDC
Output current 12CH,5A/CH

Total MAX 60A
Output power 12 x (60-120)W
Output type Constant voltage
Safety and EMC
EMC standard (EMC) EN55032:2015, EN61000-3-2:2014, EN61000-3-2:2013, EN55024 :2010/A1:2015
Safety standard(LVD) EN 61347-1:2015

EN 61347-2-11:2015
Certification CE,EMC,LVD
Environment
Operation temperature Ta: -30 OC ~ +55 OC
Case temperature (Max.) T c: +85OC
IP rating IP20
Warranty and Protection
Warranty 5 years
Protection Reverse Polarity

Operation

System parameter setting

  • Long press M and ◀ key for 2s, prepare for setup system parameter: decode mode,

output PWM frequence, output brightness curve, automatic blank screen.

short press M key to switch four item.

  • Decode mode: short press ◀ or ▶ key to switch 1-channel decode(“d–1”), 3-channeldecode(“d–3”) ,

6-channel decode(“d–6”) or 12-channel decode(“d-12”). When set as 1 channel decode,

the decoder occupy only 1 DMX address, and 12 channel output the same brightness of this DMX address.

  • Output PWM frequence: short press ◀ or ▶ key to switch 500Hz(“F–L”) or 2KHz(“F–H”). Higher PWM frequency,

will cause lower output current, higher power noise, but more suitable for camera(No flflickers for video).

  • Output brightness curve: short press ◀ or ▶ key to switch linear curve(“C–L”) or logarithmic curve(“C–E”).
  • Automatic blank screen: short press ◀ or ▶ key to switch enable (“bon”) or disable(“boFF”)

automatic blank screen.

  • Long press M key for 2s or timeout 10s, quit system parameter setting.

DMX mode

  • Shortpress M key, when display A001~2048, enter DMXmode.
  • Press ◀ or ▶ key to change DMX decode startaddress(001~2048),
long press for fast adjustment.
  • Ifthere is a DMX signal input, will enter DMX mode
  • DMX Dimming: Each D12 DMX decoder occupy 12 DMX address
when connecting the DMX console.For example, the defaulted start address is 1, their corresponding relationship in the form:

DMX mode

(A001~2048)

DMX Console DMX Decoder Output
CH1 0-255 CH1 PWM 0-100% (LED 1#R)
CH2 0-255 CH2 PWM 0-100% (LED 1#G)
CH3 0-255 CH3 PWM 0-100% (LED 1#B)
: :
CH12 0-255 CH12 PWM 0-100% (LED 4#B)

Stand-alone RGB mode

  • Short press M key, when display P–1~P–4, enter stand-alone RGB mode.
  • Press ◀ or ▶ key to change dynamic mode number(P–1~P–4).
  • Each mode can adjust speed and brightness.

Long press M key for 2s, prepare for setup mode speed, brightness.

Short press M key to switch two item.

Press ◀ or ▶ key to setup value of each item.

Mode speed : 1-10 level speed(SP-1, SP-9, SP-F).

Mode brightness: 1-10 level brightness(br-1, br-9, br-F).

Long press M key for 2s, or timeout 10s, quit setting.

  • Enter stand-alone RGB mode only when DMX signal is disconnected or lost.

Stand-alone RGB mode

(P–1~P–4)

Speed

(8 level)

Brightness

(10 level,100％)

RGB change mode list

No. Name
P–1 White forward jump chase
P–2 White forward smooth float
P–3 Red,green,blue,white forward jump chase
P–4 Red,yellow, green,cyan,blue,purple forward smooth float

Stand-alone dimmer mode

  • Short press M key, when display L–1~L–8, enter stand-alone dimmer mode.
  • Press ◀ or ▶ key to change dimmer mode number(L–1~L–8).
  • Each dimmer mode can adjust each channel brightness independently.

Long press M key for 2s, prepare for setup 12 channel brightness.

Short press M key to switch 12 channel(0100~01FF, 0200~02FF,

0300~03FF, … , 1200~12FF),.

Press ◀ or ▶ key to setup brightness value of each channel.

Long press M key for 2s, or timeout 10s, quit setting.

  • Enter stand-alone dimmer mode only when DMX signal is disconnected or lost.

Stand-alone dimmer model

(L-1~L-8)

Restore factory default parameter

  • Long press ◀ and ▶ key for 2s, restore factory default parameter, display”RES”.
  • Factory default parameter: DMX decode mode, DMX decode start address is 1, 12 channel decode,

low PWM frequence output, logarithmic brightness curve, RGB mode number is 1,

dimmer mode number is 1, disable automatic blank screen.