

Product Features:
- External IC, 12V three lights one control
-
WS2818B is cost-effective, popular in the market, and has a large shipment volume.
-
WS2818B with breakpoint resume function, reduce maintenance cost
Product Specifications:
Part No: | Input Voltage | IC type | LED Quantity | IC QTY | PCB width: | Color | Max Power | Min Cut | IP Grade | Control signal: |
LW-D0039 | 12V | WS2818B | 60leds/m | 20 | 10mm | white | 18W/M | 16.66mm | IP20 | SPI |
Products Details:
01 . External IC, 12V three lights one control
- 12V is 3 led chips in one pixel,, using SMD 5050 lamp beads, 9*9 mil light-emitting chip; external IC WS2818B, to achieve addressable, programmable digital light bar



02 .WS2818B with breakpoint resume function, reduce maintenance cost
The WS2818B can continuously transmit the signal in the event of a signal interruption, if any Pixel on the strip is disconnected, the circuit will remain off, while the other Pixels will continue to glow. As long as the other adjacent Pixels are not damaged, the other Pixels will work fine.

03 . Wiring: WS2818B 4PIN
- WS2818 Wiring:4PIN Connector and extra red / black power wires,red wire 12V (V+) yellow wire: signal wire, green wire: Backup data signal input, black wire: ground wire GND) The extra two are spare power cables, red 12V (V+), black 12V negative (V-)


04 . Customizable in various sizes
Cutting and welding is convenient and free: each LED can form a loop, which can be arbitrarily cut and welded along the above tangent to meet the needs of various light strip lengths required by customers

05 . Waterproof levels
It can be made into a variety of waterproof levels, dripping waterproof (IP65), all-inclusive casing waterproof (IP67), plastic injection in the casing (IP68), and the latest extrusion molding (IP68)

06 . Flexible PCB
- WS2812B & WS2813 Using the most flexible FPC as the base material, FPC has good electrical conductivity, fast heat dissipation, bending resistance, and can be arbitrarily bent into any shape。
- Double Layer Pure Copper Flexible Circuit Board is Adopted to Ensure Excellent Conductivity and Extremely Long Service Life of the Lamp Strip.
07 . Dimensions:
12V-60 LEDs/M
08 . Connect Drawing:
The Installation:
(1) Paste Installation:
This Installation Method is Generally Used for the Waterproof Environment,
And the High-viscosity 3m Adhesive is Attached to the Back of the Lamp Strip,
Which Can Be Directly Pasted on the Required Solid. The Surface of the Media.

Easy to Use and Easy to Install

Tear Off the Adhesive Tape

Paste to Where You Need to Install
(2) Snap-on Installation:
This Installation Method is Suitable for the Casing Waterproof Product.
The Product is Fixed by the Screw Transparent Buckle to Make the Installation Firmer.

Accessories (Clips+Screw+Screwd-Diver)

Put the Clips on the Strip

Fixed the Clips
SAFETY INFORMATION
· Please Consult an Electrician Before Doing Any Electrical Worker.
· the Strip and Its Components Cannot Be Mechanically Pressed.
· Correct Electrical Polarity Needs to Be Addressed.
· Pay Attention to ESD Precautions During Assembly.
· Installation Should Be Done by an Electrician.
STORAGE CONDITIONS
· The LEDs Should Be Kept at ≤86°f and ≤70%RH.
· When Storing the LEDs Use Moisture Proof Packaging.

Accessories Display:




10 of the Most Common Customer Questions (FAQ)
Yes, it is. We have 5V SK6812 white, 12V WS2818B white, UCSDMX512B3 white addressable led strip.
12V DC LED Strip longest length is 16ft (5 meters); 24V DC LED strip longest length is 32ft (10 meters). 24V Constant Current (CC) LED Strip is 65ft (20 meters). 120V / 220LED Strip maximum length is 164ft (50 meters).
Addressable led strip means the strip have IC inside, it can control every single led, you can control every led with different colors. But all the LED on the RGB led strip only can light same color on the same time.
Yes, RGB LEDs can mix the white color, but it will not so pure as the real white. An extra white is better for you white color request.
No. RGB led strip without IC inside, there can not be addressable. Addressable led strip means there have IC on it, so it can be control different in every LED colors or every group colors.