- External IC,24V six lights one control
TM1934 is cost-effective, popular in the market, and has a large shipment volume.
- TM1934 with breakpoint resume function, reduce maintenance costs
|Part No:||Input Voltage||IC type||LED Quantity||IC QTY||PCB width:||Color||Max Power||Min Cut||IP Grade||Control signal:|
01 . External IC,24V six lights one control
24V is 6 led chips in one pixel,, using SMD 5050 lamp beads, 9*9 mil light-emitting chip; external IC TM1934, to achieve addressable, programmable digital light bar
02 . TM1934 is cost-effective, popular in the market, and has a large shipment volume.
The TM1934 can continuously transmit the signal in the event of a signal interruption, if any Pixel on the strip is disconnected, the circuit will remain off, while the other Pixels will continue to glow. As long as the other adjacent Pixels are not damaged, the other Pixels will work fine.
03 . Wiring: TM1934 RGB 4PIN。
TM1934 Wiring:4PIN Connector and extra red / black power wires,red wire 24V (V+) yellow wire: signal wire, green wire: Backup data signal input， black wire: ground wire GND) The extra two are spare power cables, red 24V (V+), black 24V negative (V-)
04 . Customizable in various sizes
Cutting and welding is convenient and free: each LED can form a loop, which can be arbitrarily cut and welded along the above tangent to meet the needs of various light strip lengths required by customers
05 . Waterproof levels
It can be made into a variety of waterproof levels, dripping waterproof (IP65), all-inclusive waterproof casing (IP67), plastic injection in the casing (IP68), and the latest extrusion molding (IP68)
06 . Flexible PCB
- TM1934 LED Strip Light Using the most flexible FPC as the base material, FPC has good electrical conductivity, fast heat dissipation, bending resistance, and can be arbitrarily bent into any shape。
- Double Layer Pure Copper Flexible Circuit Board is Adopted to Ensure Excellent Conductivity and Extremely Long Service Life of the Lamp Strip.
07 . Dimensions:
08 . Connect Drawing:
(1) Paste Installation:
This Installation Method is Generally Used for the Waterproof Environment,
And the High-viscosity 3m Adhesive is Attached to the Back of the Lamp Strip,
Which Can Be Directly Pasted on the Required Solid. The Surface of the Media.
Easy to Use and Easy to Install
Tear Off the Adhesive Tape
Paste to Where You Need to Install
(2) Snap-on Installation:
This Installation Method is Suitable for the Casing Waterproof Product.
The Product is Fixed by the Screw Transparent Buckle to Make the Installation Firmer.
Put the Clips on the Strip
Fixed the Clips
· Please Consult an Electrician Before Doing Any Electrical Worker.
· the Strip and Its Components Cannot Be Mechanically Pressed.
· Correct Electrical Polarity Needs to Be Addressed.
· Pay Attention to ESD Precautions During Assembly.
· Installation Should Be Done by an Electrician.
· The LEDs Should Be Kept at ≤86°f and ≤70%RH.
· When Storing the LEDs Use Moisture Proof Packaging.
10 of the Most Common Customer Questions (FAQ)
12V Addressable led strip is not brighter than 5V, 12V need less current and less voltage drop thane 5V.
12V DC LED Strip longest length is 16ft (5 meters); 24V DC LED strip longest length is 32ft (10 meters). 24V Constant Current (CC) LED Strip is 65ft (20 meters). 120V / 220LED Strip maximum length is 164ft (50 meters).
12V Addressable led strip is 3led per cut; 24V digital led strip is 6led per cut, 12V strip have more cut mark, better for corners. 24V have less current so less voltage drop for it.
Built-in IC is make the IC in LED, there no need any more place for IC which can put more led on the PCB.
No. RGB led strip without IC inside, there can not be addressable. Addressable led strip means there have IC on it, so it can be control different in every LED colors or every group colors.